Windows XP

For Windows XP, use the following procedure to install the necessary components.

Note:

The Windows XP CD may be required during the installation.

1.Click Start, highlight Control Panel, and then click Network and Internet Connections. Select Network Connections.

2.Under LAN or High-Speed Internet, click the Local Area Connection icon.

3.Under Network Tasks, click Change settings of this connection.

4.Check if the following network components are in the list. If they are already installed, go to “Network Software” on page 29.

The following table lists the network components required for configuring the network interface with EpsonNet Config.

EpsonNet Config’s setting screens

Necessary components

 

 

TCP/IP, SNMP (IP trap)

Internet Protocol (TCP/IP)

 

 

14Setting Up Your System for Network Printing