Configure the network interface for use on a TCP/IP network.
1.Make sure that the printer is turned on, and the LCD displays READY.
2.Press the Menu r button on the printer to enter the printer’s menu system.
3.Press d to highlight NETWORK SETUP, then press r.
4.Press r, then d to highlight ENABLE.
5.Press OK. A checkmark appears next to ENABLE to show that it’s selected.
6.Press r, then d to highlight IP ADDRESS SETTING.
7.Press r, then press u or d to choose one of the following IP configuration settings:
❏Choose AUTO if your network uses a DHCP server to configure your network devices’ IP settings automatically.
❏Choose PANEL if you would like to configure the printer’s IP settings manually.
8.Press OK. A checkbox appears next to the setting you selected.
9.Press l, to go back, then do one of the following:
❏If you selected AUTO as the IP address setting, press the 
Pause button to exit the printer menu. Then continue with step 14.
❏If you selected PANEL as the IP address setting, continue with step 10.
10.Press d to highlight IP, SM, DG SETTING, then press r. The LCD displays the IP address.
11.Press u or d to change each octet value, then press r to select the next octet. When you have changed the value of the last octet, press r. The LCD displays the subnet mask.
12.Press u or d to change each octet value, then press r to select the next octet. When you have changed the value of the last octet, press r. The LCD displays the default gateway.
Setting Up Your System for Network Printing 17