Connecting the Mouse and Serial Cables
To use the remote control as a mouse or use the EMP Link V software, follow the steps below. This illustration shows the connections you’ll be making:
Mac serial cable
Mac or
USB cable
main cable
Mouse/Com port
1.Connect the small end of the main cable to the projector’s
Mouse/Com port.
2.To use the remote control as a wireless mouse, connect one end of the projector’s Mac mouse or USB cable to the MOUSE terminal on the square end of the main cable.
3.Disconnect your Macintosh’s mouse cable. Connect the other end of the projector’s Mac mouse or USB cable to the mouse or USB port on your Macintosh.
Setting Up the Projector 27