Manuals / Brands / Computer Equipment / Network Card / Epson / Computer Equipment / Network Card

Epson C82310 SETTING THE CONDITIONS, Card layout, Figure 2. Card layout

1 21

Download 21 pages, 506.5 Kb

SETTING THE CONDITIONS

The C82310* interface card has two sets of DIP switches, and five jumpers. These switches and jumpers are used for selecting various interface operations.

Card layout

The figure below shows the layout of the C82310* card and the locations of the DIP switches and jumpers.

Figure 2. Card layout

Contents

Page FCC COMPLIANCE STATEMENT FOR AMERICAN USERS Page TABLE OF CONTENTS INTRODUCTION About this guide SETTING THE CONDITIONS Card layout DIP switch and jumper settings Caution DIP switches DIP switch 1 (interface operations) Table 1. DIP switch Note Switch Table 2. Switch Jumpers Table 3. Jumper settings DATA ENTRY About data entry SELF TEST SPECIFICATIONS Interface timing Figure 3. Interface timing HARDWARE DESCRIPTION Table 5. Signal description and pin assignment Page Page INSTALLATION Caution