Manuals / Brands / Computer Equipment / Network Card / Epson / Computer Equipment / Network Card

Epson C82310 Note, Switch, Table 2. Switch, Table 1. DIP switch, DIP switch 1 (interface operations)

1 21

Download 21 pages, 506.5 Kb

DIP switch 1 (interface operations)

The table below contains information on switch func- tions, and the factory setting of each switch.

Table 1. DIP switch 1Note

When DIP switch l-l is set to ON, the interface card can continue store data in the buffer memory even though the printer is in an OFF LINE or PAUSE state.

Switch 2

The table below contains information on switch 2.

Table 2. Switch 2

Function	O N	OFF	Factory
Function	O N	OFF	setting
			setting

The I/F card enable/disable	Enable	Disable	ON

Contents

Page FCC COMPLIANCE STATEMENT FOR AMERICAN USERS Page TABLE OF CONTENTS INTRODUCTION About this guide SETTING THE CONDITIONS Card layout DIP switch and jumper settings Caution DIP switches DIP switch 1 (interface operations) Table 1. DIP switch Note Switch Table 2. Switch Jumpers Table 3. Jumper settings DATA ENTRY About data entry SELF TEST SPECIFICATIONS Interface timing Figure 3. Interface timing HARDWARE DESCRIPTION Table 5. Signal description and pin assignment Page Page INSTALLATION Caution