oOther errors that can be corrected without turning the printer off.
After these printer errors are corrected, the fax board starts to print the received fax data automatically.
When the fax board stops receiving a fax
The fax board stops receiving fax data in the following situations:
oService request error (SERVICE REQ on printer’s LCD) o Fax reception buffer full
o Fax sender quits sending the fax o Loss of phone line connection
oProtocol mismatched between the fax board and the other fax machine.
If one of these should occur, all or some part of the received fax data may be lost.
Wrong printer error
The fax board operates in the EPSON printers listed in the Introduction. If it is installed in any other printer, it may not print, it may print garbage, or it may print the following message:
This card cannot be used in the printer. Pull out the card.
Ver Fl.xx / Vl.xxA
STATUS CODE xxxxxxxx
SEIKO EPSON CORPORATION
10Troubleshooting