Fax modem mode

If you want to use the fax board to send faxes from your computer, you need to buy a straight through serial (or modem) cable and appropriate fax modem software. One cable is included with your fax board, but you need an additional cable to connect the board to your computer.

You need a standard straight through (or modem) cable with a 25-pin connector on one end and a 9-pin connector (for the computer) on the other end or with 25-pin connectors on both ends, depending on the serial port of your computer. Check your computer before you buy the cable. When you have the appropriate serial cable, follow the steps below:

1.Connect the 9-pin connector of the supplied cable to the fax board.

2.Connect the 25-pin connector of the modem cable to the 25-pin connector of the supplied cable.

3.Connect the 9-pin (or 25-pin) connector of the modem cable to your computer.

4.Follow the instructions for your fax modem software to install and use the software.

Where to get help

Epson America provides local customer support and service through a nationwide network of authorized EPSON dealers and Service Centers.

EPSON also provides technical assistance with the installation, configuration, and operation of EPSON products through EPSON Connection. U.S. users can call (800) 922-8911; Canadian users can call (800) GO-EPSON.

8 Setup