Setup

Setting up your fax board is a four-step process:

1.Set the DIP switches on the board.

2.Install the board in your printer.

3.Plug the appropriate cables into the board.

4.Perform a self test.

Before you install your fax board, you need to make a number of choices about how your fax board will work. Read the descriptions below, make your choices, and then proceed with your setup.

Fax reception modes

This board has three fax reception modes:

oAutomatic reception-it starts to receive a fax when the ring signal is detected.

oSelective reception-it starts to receive a fax either 15 or 30 seconds after it detects a ring signal (depending on the setting you select).

oManual reception-you have to use software or press the manual reception button to receive a fax.

2Setup