EPSON Printers Supported by the Ethernet Card

EPSON’s Ethernet Card can be installed in a variety of EPSON laser and dot-matrix printers.

Check you printer guide for a list of optional interfaces that can be installed in your printer, or check with your local EPSON dealer. If you are using an optional LocalTalk interface, see your interface guide for information on compatibility.

Overview

This manual describes how to install, configure, and use your Ethernet Card in a variety of network environments using the following cable connections:

Cl Ethernet Twisted-Pair (l0BASE-T)

Q Ethernet Thin Coaxial (l0BASE2)

Installation of the Ethernet Card in your printer is simple and is described in Chapter 1. The following steps provide an overview of the installation process.

1.Install the Ethernet Card in your EPSON printer and connect it to the network as described in Chapter 1.

2.Follow the instructions for installation under your specific network environment. Use the EPSON Net! software if you are installing on a Novell NetWare network or use Epson Zoner and Epson Namer (if required) if installing on an Ethertalk network.

4 Introduction