Selecting a Zone with Epson Zoner

A zone is a group of users, computers, and devices, including printers. Zones can be grouped according to physical location, and would include, for example, all of the printers in a particular building. Zones can also be grouped logically, according to work groups or departments. For example, Zone 1 could contain all of the printers used by a company’s marketing department or publications group.

Use the Epson Zoner utility to assign your printer to a specific zone on a Phase II Ethertalk network.

Note:

Epson Zoner cannot be used on a Phase I network.

Using Epson Zoner

Follow these steps to select a zone for your printer.

1.Make sure that your Ethernet Card-equipped printer is on and is ready. After turning on the printer, it will take about a minute for PostScript to initialize.

2.Insert the EPSON Net! for Macintosh disk into your computer. Double-click the disk icon to open it, if necessary.

3.Create a new folder for Epson Zoner, if desired, and then copy the utility to your Macintosh.

3-6 Installing on an Apple Ethertalk Network