Product Update for EPSON PostScriptPrinter Users

This update applies only to networks that include EPSON PostScript® printers.

Note:

If your network does not include Macintosh® workstations, please disregard this update. No additional settings need to be made.

Your C82331* Ethernet Interface Card cannot automatically switch between AppleTalk® and non-AppleTalk PostScript printing environments. You first need to configure your printer for AppleTalk or non-AppleTalk PostScript printing with the AppleTalk PS option in the Epson Zoner utility. The Epson Zoner dialog box shown on page 3-7 of your User’s Guide should appear as follows:

To configure your printer, see the appropriate section below.

For non-AppleTalk PostScript printer support

Make sure the AppleTalk PS option in Epson Zoner is set to Inactive (default setting).

For AppleTalk PostScript printer support

Be sure to change the AppleTalk I’S option in Epson Zoner to Active.

After changing the AppleTalk PS option, click the Set button and wait for at least 30 seconds before rebooting your printer.

Copyright © 1995 by Seiko Epson Corporation

4004273

Printed In Japan 95.02.1

EH3-00