Configuring the Ethernet Card in Auto

PrintServer/Remote Mode

When using the Ethernet Card-equipped printer in Auto PrintServer/Remote mode, you need to configure it for both print server and remote printer operation. For information on changing the various print server and remote printer settings, see the appropriate sections earlier in this chapter.

Before you configure the card, first make sure the host printer is turned on and the interface is connected to the network. Then log on to the selected file server with supervisor privileges and follow these steps:

1.Run EPSON Net!.

2.Select the printer you wish to configure and click Open.

3.Click Edit to open the NetWare config dialog box.

4.Click the Auto PrintServer/Remote option button under Operating Mode to select auto switching mode.

2-18 Installing on Novell NetWare