Selecting PostScript

For EPL-7000/7100 users

1.Hold down the SelecType button for several seconds until you enter SelecType Level 2. A SelecType Level 1 option is displayed briefly before the printer enters the Level 2 main menu.

2.Press the Aor vbutton until the “CH CONFIG P,S” menu appears.

3.Press the bbutton to enter the option; one of the submenus (MODE, I/F, or RX-/BUFFER) appears.

4.Press theA or vbutton until the MODE submenu appears. If this menu is displayed in step 3, ignore this step.

5.Press the bbutton to enter the option; one of the options and the El icon appear.

6.Press the Aor vbutton until the “# PS” option appears.

7.Press the bbutton to set the PS option.

8.Press the SelecType button once to exit SelecType.

The PS mode remains in effect until you change the setting or turn off the printer. If you want to make this setting permanent, use the “P-CONFIG. SAVE” menu in SelecType Level 2. See your printer manual.

Handing the PostScript CARD 1-5