
Removing the Card
Follow these steps if you need to remove the card:
1. Make sure the printer is turned off.
2.Remove the card by grasping it at the center and gently pulling it straight out.
Never insert or remove the card while the printer is turned
3.Turn on the printer.
If the CH.
Note: Never remove this card while the printer is on line, in SelecType mode, or while resetting. If you do, a REINSERT CARD, REMOVE CARD, or SERVICE REQ. message may appear on the display. See the section on card error messages in your printer manual.
Handing the PostScript CARD