SelecType

L-OFFSET

from -64 to -1Makes fine adjustments in the horizontal printing position (left offset) on the page. The

from 1 to 63setting is in dots; the size of each dot varies depending on the printer. For example, EPL-4100 is a 300-dpi printer, so the dot size is 1/300 inch (0.0846 mm). In this case, you can use this submenu to move the printing on the page approximately 1/5 inch to the left (settings from -64 to -1) or to the right (settings from 1 to 63). The factory setting is 0.

T-OFFSET

from -64 to -1M a k e s fine adjustments in the vertical printing

-0position (top offset) on the page. The setting is

from 1 to 63in dots; the size of each dot varies depending on the printer. For example, the EPL-4100 is a 300 dpi printer, so the dot size is 1/300 inch (0.0846 mm). In this case, you can use this submenu to raise or lower the printing on the page approximately 1/5 inch. The factory setting is 0.

PAGETYPE

+ F U L LSets the memory area. Your printer maintains a

NOTEmemory area for processing printing data. There are two sizes of memory area. If the FULL option is selected, your printer maintains a large memory area. If the NOTE option is selected, it maintains a small memory area. If you print on LG (legal), GLG (government legal), or F4 size paper, you should expand your printer’s memory or the image of your output might be clipped.

2-6 Using the PostScript CARD