Epson D28114 and 5 Grinding Wheels, Assembly and Adjustments, Rotating the Gear Case

4-1/2" and 5" Grinding Wheels

6" Grinding Wheels

Type 27 guard

Quick-change wheel release

Type 27 depressed

center wheel

threaded clamp nut

Type 27 guard

Type 27 hubbed wheel

Type 27 guard

Stamped steel

quick-change wheel release

Type 27 depressed

center wheel

threaded clamp nut

Type 27 guard

Type 27 hubbed wheel

English

ASSEMBLY AND ADJUSTMENTS

ATTACHING SIDE HANDLE
The side handle (E) can be fitted to either side of	E
the gear case in the threaded holes, as shown.
Before using the tool, check that the handle is
tightened securely. Use a wrench to firmly tighten
the side handle.

Rotating the Gear Case

CAUTION: Turn off and unplug tool before making any adjustments or removing or installing accessories. Before reconnecting the tool, depress and release the trigger switch to ensure that the tool is off.

1.Remove guard and flanges from tool.

2.Remove the four corner screws attaching the gear case to motor housing.

3.Separating the gear case from motor housing not more than 1/4", rotate the gear case head to desired position.

6