Setting | Options (default in bold) |
|
|
Software | ESC/P,® IBM PPDS |
|
|
0 slash | Off, On |
|
|
I/F (Interface) mode | Auto, Parallel, Serial, USB, Optional |
|
|
Auto I/F (Interface) wait time | 10 seconds, 30 seconds |
|
|
Parallel I/F | Off, On |
|
|
Packet mode | Auto, Off |
|
|
Serial baud rate | 19200 BPS, 9600 BPS, 4800 BPS, 2400 BPS, |
| 1200 BPS, 600 BPS, 300 BPS |
|
|
Serial parity | None, Odd, Even, Ignore |
|
|
Serial data length | |
|
|
Character table | Standard version: PC437, PC850, PC860, PC863, |
| PC865, PC861, BRASCII, Abicomp, Roman8, ISO |
| Latin 1, PC858, ISO |
| France, Italic Germany, Italic U.K., Italic Denmark 1, |
| Italic Sweden, Italic Italy, Italic Spain 1 |
|
|
| NLSP version: PC437, PC850, PC860, PC863, PC865, |
| PC861, BRASCII, Abicomp, Roman8, ISO Latin 1, |
| PC858, ISO |
| PC852, PC857, PC866, PC869, MAZOWIA, Code |
| MJK, ISO |
| Estonia, ISO |
| APTEC, PC708, PC720, PCAR864, PC771, PC437 |
| Slovenia, PC MC, PC1250, PC1251, Italic U.S.A., |
| Italic France, Italic Germany, Italic U.K., Italic |
| Denmark 1, Italic Sweden, Italic Italy, Italic Spain 1 |
|
|
Auto CR (IBM PPDS)*1 | Off, On |
|
|
IBM character table (IBM | Table 2, Table 1 |
PPDS)*1 |
|
|
|
Buzzer | Off, On |
|
|
Off, On | |
|
|
Auto cut mode*2 | Off, On |
|
|
Auto cut/back mode*2 | Off, On |
|
|
Overlapping multipart forms | Off, On |
|
|
Continuous forms with labels | Off, On |
|
|
Skip over binding | Off, On |
|
|
Get IP address*3 | Panel, Auto, PING |
|
|
IP address*4 | 000.000.000.000 to 255.255.255.255 |
|
|
Setting | Options (default in bold) |
|
| |
|
|
|
| |
Subnet mask*3 | 000.000.000.000 to 255.255.255.255 |
| English | |
|
|
|
| |
Default gateway*3 | 000.000.000.000 to 255.255.255.255 |
| ||
|
| |||
|
|
|
| |
Save settings?*5 | Yes, No |
|
| |
|
|
|
|
|
*1 | This setting is available only in IBM PPDS emulation mode. |
| ||
*2 | This setting is available only when the optional perforation cutter (#C81570X) is installed. |
| ||
*3 | These settings are available only when the optional Print Server is installed. |
| ||
| ||||
*4 | This setting is available only when the optional Print Server is installed and the Get IP address setting is |
| ||
| set to Panel or PING. |
|
|
|
*5 | This menu appears when you press the Menu buttons (Tear Off and Top of Form) in SelecType mode. |
|
2.Press the Menu buttons (Tear Off and Top of Form) to enter the SelecType mode. The LCD displays the currently selected language.
3.If you want a different language, press the SetU (Tear Off) or SetD (Top of Form) button until you see the language you want.
4.Press the ItemD (Pitch) button to set the desired language.5.You see Print Settings on the LCD. Press the SetD (Top of Form) button to print the current settings.
6.Press the ItemU (Font) or ItemD (Pitch) button to select the setting you want to change.
Note:
You can scroll the menu settings by holding down the ItemU (Font) or ItemD (Pitch) button for a few seconds.
7.Press the SetU (Tear Off) or SetD (Top of Form) button to scroll through the options available for the current setting until you see the one you want.
Note:
You can scroll the options by holding down the SetU (Tear Off) or SetD (Top of Form) button for a few seconds.
8.When you finish making settings, press and hold down the Menu buttons (Tear Off and Top of Form). The LCD displays Save Setting.
Using SelecType Mode 19