Installing and Using the Remote Configuration Manager
The Epson Remote Configuration Manager provides an easy way to change your printer’s default settings in Windows. Follow these steps to install it:
1.Select Install EPSON Remote Configuration Manager on the Installation
screen and click .2.When you see the InstallShield window, click Yes. You see this screen:3.Click Next and follow the4.When the installation is complete, click Finish. (You may need to close a window on your screen to see the final installation screen.)
To start the program, select Programs (or All Programs) > Epson Remote Configuration Mgr > Epson Remote Configuration Manager.
To open the program’s
Note:
If you are using the serial port, you need to switch the printer driver to COM2 before you run the Remote Configuration Manager. Switch it back to COM1 when you’re done.
8 Installing and Using the Remote Configuration Manager