Epson Connecting with a USB cable and Projecting (USB Display)

Connecting for the first time
When connecting for the first time, you need to install the driver. The
installation procedure differs for Windows and Mac OS.
Procedure
For Windows
A Driver installation starts automatically.
When you are using a Windows 2000 computer, double-click My
Computer - EPSON_PJ_UD - EMP_UDSE.EXE, on your computer.
When using a computer running Windows 2000 under user
authority, a Windows error message is displayed during installation
and you may not be able to install the software. In this case, try
updating Windows to the latest version, restart, and then try to
connect again.
For more details, contact the nearest address provided in the Support
and Service Guide. s Epson Projector Contact List
B Click "Agree".
If the driver is not installed, you cannot start USB Display. Select
Agree to install the driver. If you want to cancel installation, click
Disagree.
C Computer images are projected.
It may take a while before computer images are projected. Until
computer images are projected, leave the equipment as it is and do
not disconnect the USB cable or turn off the power to the projector.
D When you are finished, disconnect the USB cable.
The projector can be disconnected simply by disconnecting the USB
cable. There is no need to use the Safely Remove Hardware feature
in Windows.
Connecting with a USB cable and Projecting (USB Display)
20