Sub Menu Function
Auto Iris (This item can be selected only if Dynamic or Theatre is selected as the Color Mode from the Image menu.)
Set whether or not (On/Off) to adjust to the optimum light status for images being projected. s p.25
Reset You can reset all adjustment values for the Image menu functions to their default settings. To return all menu items to their default settings, see s
p.56
Signal MenuItems that can be set vary depending on the Source currently being projected as shown in the following screen shots. Setting details are saved for each Source
and its signal status. You cannot make settings on the Signal menu when the source is USB Display/USB
*3
.
Computer
*1
Computer
*2
S-Video/Video HDMI
*3
*1 When an RGB signal is input
*2 When a Component Video signal is input
*3 EB-W10/X10 only
Sub Menu Function
Auto Setup You can select whether or not (On/Off) Auto Setup automatically adjusts the image to the optimum state when the Input Signal changes.
Resolution When set to Auto, the resolution of the input signal is automatically identified. If the images cannot be projected correctly when set to Auto, such as
when some of the image is missing, adjust to Wide depending on the connected computer for wide screens, or set to Normal for 4:3 or 5:4 screens.
Tracking
g
You can adjust computer images when vertical stripes appear in the images.
Sync.
g
You can adjust computer images when flickering, fuzziness, or interference appear in the images.
Position You can adjust the display Position up, down, left, and right when a part of the image is missing so that the whole image is projected.
List of Functions
50