If the parameters for your hard disk (listed in its documentation) do not match any of the types listed in the table above, you can define your own type. Follow these steps:
1.Move your cursor to Hard Disk 1 or 2 and press + or - until you see drive type 48 or type 49.
2.Press + to move the cursor to the Cyl field.
3.Type the appropriate cylinder value for your hard disk. The documentation that came with your hard disk drive will provide the appropriate information.
4.Continue pressing + to move the cursor to the next field and type in the appropriate values.
If you are installing
Actual formatted size may be slightly different than size on drive label.
Note
If you are going to install NetWare 286, version 2.2, you cannot assign a