Connecting to a Projector or
TV/Computer Monitor
You can connect the document camera to any projector or monitor that has a standard RGB video or composite video input port. EPSON projectors support both connections. Most computer monitors support only RGB video, while many television monitors support composite video. Follow the instructions below to connect the document camera to your output device with an RGB video cable or an RCA cable.
Connecting the RGB Video Cable
Before you start, make sure your document camera and projector or computer monitor are turned off.
1.Connect one end of the RGB video cable to the document camera’s RGB OUT port.
RGB OUT | projector |
AC IN | POWER | RGB OUT |
| VIDEO |
ON | RGB IN | OUT |
USB
0
1
A B C
OFF
or monitor
note
The RGB video input port on the projector or monitor may be labeled “computer,” or “video in.”
2.Connect the other end of the RGB video cable to the RGB video input port on the projector or computer monitor.
3.Tighten the screws on the connectors.
Setting Up the Document Camera 11