Once you see your image, turn to page 22 for instructions on making adjustments.
If your image doesn’t appear, see the next section for help.
When you’re done with your presentation, turn off the document camera as described on page 27.
What To Do If You See a Blank Screen
If an image doesn’t appear, try the following:
■Make sure the cables are connected correctly, as described on page 11 for a projector or monitor or page 13 for a computer.
■Make sure everything is turned on.
■Make sure the lighting unit lamps are on.
■If you are using a video source, such as a laptop or desktop computer, you may need to switch video sources. Press the RGB1 button as shown on page 20.
■If an image still doesn’t appear, refer to Chapter 4 for more help.
note
If you turn off the document camera, always wait a few seconds before turning it back on.
Using the Document Camera 19