Adjusting the Brightness
The document camera is initially set to auto iris. You can manually adjust the iris to control the amount of light that reaches the camera.
If the screen looks dark, press the Open button on the remote control to open the iris so that more light reaches the camera. If the screen looks too bright, press the Close button. To return to the auto iris default setting, press the Auto Iris button.
Adjusting the White Balance
In different lighting conditions it may be necessary to adjust the document camera’s white balance. This setting automatically corrects for color shifts in different lighting environments.
If the displayed image has a color cast, press the AWB button on the remote control to automatically adjust the white balance. See page 24 for manual white balance adjustments using the document camera’s
Using the Pointer
The pointer lets you direct attention to specific sections of your presentation material. You can choose from two types of pointers in four colors.
To make the pointer appear on the screen, press the Pointer button on the remote control. When the mouse is connected to the document camera, pressing the left mouse button will also display the cursor.
To move the pointer, use the direction buttons on the remote control. The mouse also allows you to move the pointer as you would on a computer.
To remove the pointer from the screen, press the Pointer button on the remote control or click the left mouse button three times (this brings up an
For information on selecting different types of pointers, see page 24.
Remote control
direction | correct | ||
buttons | color cast | ||
|
|
|
|
|
|
|
|
|
|
|
|
increase reduce brightness brightness
note
The pointer feature only works when the document camera is in the Main display mode. It does not work then the document camera is in the RGB1 display mode.
Using the Document Camera 23