Connecting to a Computer
The document camera comes with one RGB video input port. This can be used to connect a laptop or desktop computer to the document camera.
This is especially useful if your projector has only one input port. You can connect a computer to the document camera’s RGB input port as described below, and connect the document camera to the projector’s input port as described on page 11. This way, you can use the camera’s remote control to switch between picture sources. Follow the instructions on page 20 to switch between the sources.
Before you start, make sure your document camera and computer are turned off.
1.Connect one end of the RGB video cable to the document camera’s RGB IN port.
AC IN | POWER | RGB OUT |
| VIDEO |
ON | RGB IN | OUT | ||
|
|
|
| USB |
|
|
|
| 0 |
|
|
|
| 1 |
OFF |
|
|
| A B C |
|
|
|
|
or
laptop
computer
2.Connect the other end of the RGB video cable to your computer’s RGB video output (monitor) port.
3.Tighten the screws on the connectors.
Setting Up the Document Camera 13