Security Functions

fSetting Password Protect

Use the following procedure to set Password Protect.

Procedure

A Holdseconds.down the [Freeze] button for about five

The password protect setting menu is displayed.

Remote control

• If Password Protect is already activated, you must enter q theIf thepassword.password is entered correctly, the password protect

setting menu is displayed. s "Entering the password" p.28

•When the password is set, stick the password protect sticker in a visible position on the projector as a further theft deterrent.

B Turn on "Power On Protect".

27

C Turn on "Password Timer".

If you do not use this setting, go to step 4.

(1)Select "Password Timer", and then press the [Enter] button.

(2)Select "On", and then press the [Enter] button.

(3)Press the [Esc] button.

(4)Select "Timer", and then press the [Enter] button.

(5)While holding down the [Num] button, use the numeric buttons to enter the setting time within a range of 1 to 9999 hours and then press the [Enter] button. If you make a mistake entering the time, press the [Esc] button and re-enter the time. The time counter begins when you close the password protect setting menu. The count is only done while the lamp is lit, and not while it is turned off.

The time already counted is displayed in "Time-elapsed".

D Turn on "User's Logo Protect".

(1)Select "User's Logo Protect", and then press the [Enter] button.

(2)Select "On", and then press the [Enter] button.

(3)Press the [Esc] button.

E Turn on "Network Protect" (EMP-1715/1705 only).

(1)Select "Network Protect", and then press the [Enter] button.

(2)Select "On", and then press the [Enter] button.

(3)Press the [Esc] button.

(1)Select "Power On Protect", and then press the [Enter] button.

(2)Select "On", and then press the [Enter] button.

(3)Press the [Esc] button.