Adjustments
Adjusting the image angle
While pulling the foot adjust lever, lift up the front of the projector so that the front adjustable foot can extend.
To retract the front adjustable foot, gently push down on the projector while pulling the foot adjust lever.
Foot adjust lever
Front adjustable foot
When the projector is tilted, it will cause keystone distortion to appear in the image, but this distortion can be corrected using the automatic keystone correction function as long as the vertical angle of tilt is within a range of approximately 15˚. If you would like to make further minor adjustments to the result of automatic
keystone correction, use 
on the projector's control panel.
User's Guide
"Adjusting the Screen Image"
Adjusting the image size and focus
Fine adjustments to
image size
Turn the zoom ring to adjust the image size.
Turn to the "W" side to increase the image size, and turn to the "T" side to reduce the image size.
Adjusting the focus
Turn the focus ring to adjust the focus.
The following adjustments can also be made.
Auto Setup (only when computer or RGB video signals are being projected)
Tip | User's Guide "Adjusting Computer Images and RGB Video Images" |
When projecting computer images, the input signals are detected automatically and adjusted so that the optimum images are projected. If the results of automatic adjustment are not satisfactory, individual settings can also be adjusted manually using the menus.
Other adjustments 
User's Guide "Using the Configuration Menu Functions"
Press 
on either the remote control or the projector to display the Configuration menu. You can use the configuration menu functions to adjust setting such as brightness, contrast and colour.
Turning the Projector Off
1 | Turn off the power for all sources connected to | |
2 | the projector. | |
Press | twice to turn off the power. | |
The Power indicator will flash orange
If a message prompting you to clean or replace the air filter appears, follow the instructions in the message.
User's Guide
"Turning Off the Projector"
Power indicator
Operating problems may occur if the power cable is disconnected while the Power indicator is flashing orange.
3 When the