Epson EMP-8000 manual Remote control

EMP-9000/9000NL/8000/8000NL

QUICK START

Power

Freeze

A/V Mute

R/C ON

E-ZoomOFF

3

2 4

1

5

Enter

Esc

	Remote control
Button	Function
Freeze	Keeps the current computer or video image on the screen.
A/V Mute	Turns off/on the audio/video output of the projector. To turn on the audio/video output, press
	either the A/V mute button again or Esc button.
E-Zoom	Executes the E-zoom function. When you press the right of the button, it enlarges the image.
	When you press the left of the button, it reduces the image.
	To display a portion of the enlarged image which is outside of the display area, press the
	Pointer button to scroll the image.
Power	Turns the projector on or off.

Effect buttons Use to display special effects that have been assigned in the Effect menu or with the optional ELP Link IV software.

Enter	Use the enter button to navigate the menus or use the remote as a mouse pointer when the
	projector is connected to the computer with the main cable and the mouse cable.
	You can also selects a menu option by pressing the center of this button(Enter).
	If you press the Enter when a menu or help is displayed, you can access to the next menu
	layer. When the image source is a computer, the Enter button acts as the mouse left click.
Illumination	Lights up all buttons on the remote control.
button
Esc	Terminates the current function that you have been executing .
	If you press the Esc button when a menu or help is displayed, you can go back to the previous
	menu layer.
	When the image source is a computer, the Esc button acts as the mouse right click.
Menu	Displays or hides the menu.
Help	Displays the Help menu.
Comp 1	Switches to the computer image from Computer 1.
Com2/BNC	Switches to the image from Computer2 / BNC.
S-Video	Switches to the video image from S-Video.
Video	Switches to the image from Video.
Auto	Optimizes the computer image.
Resize	Switches the Window display and Resizing display.
P in P	Displays a subscreen on the main screen. To display the subscreen, press the PinP button
	once. To hide the subscreen, press it again.
	To set the subscreen being displayed, press in the following order :
	[Menu] → [Setting] → [P in P].
	The default settings are as follows;
	Subscreen size:1/9 division
	Main screen input source:Computer
	Subscreen input source:Video
	To change the subscreen position, press the Pointer button. The subscreen will move to the
	selected direction.
Preset	The current settings for the computer input signal are saved and recalled for the next use.
	User can save the preset up to five settings.
	The following settings are saved: Resolution, Tracking, Sync Signal, Position.
Volume +/-	Adjusts the volume.