Epson EMP-8000 manual

If you need to raise or lower the image on the screen, extend or retract the two feet at the bottom of the projector as follows:

1.Stand behind the projector and support the front of it while you lift the foot adjust levers above the feet. This unlocks the feet so they can move up and down freely. Do not let the projector drop.

♦Caution: Do not hold the projector by its lens. This can damage the lens.

2.While lifting the foot adjust levers, raise or lower the projector until the screen image is positioned correctly.

3.Release the lever to lock the feet in their new position.

4.To fine-tune the height of the projector, turn the feet clockwise to raise the height or anti-clockwise to lower it.

■ ■ ■ ■

38