Connecting the Audio Cable
1.If you will be using audio, connect one end of the audio cable to the Audio 1 jack on the projector. (Use the Audio 2 jack if you are connecting a second computer.)
Audio 1 jack
audio cable
2. Connect the other end of the audio cable to your laptop.
Connecting to a Desktop Macintosh
To connect the projector to your desktop Macintosh, you need to:
•Connect the computer cable and computer monitor cable
•Connect the mouse and/or serial cable (if you want to use the remote control as a mouse or use the ELP Link IV software)
•Connect the audio cable (if you’ll be projecting with audio)
Follow the steps in each section for the cables you need to connect. Before beginning, turn off the projector and computer if they are on.
♦Note: Macintosh configurations vary. See your computer manual for the location of the ports needed to connect your projector.
■ ■ ■
Connecting to a Computer 15
