30 - Connecting the projector to a computer● When the monitor port is the 5BNC
Point
·Do not bind the Power Cable and the Computer Cable together. Failure to observe this
may result in video noise and malfunctions.
·An adapter may be required when making the connection depending on the stand of the
computer’s port. Refer to the computer instruction manual for further details.
·There are cases where the optional Mac Desktop Adapter (ELPAP01) is required when
connecting up to a Macintosh.
·It is possible to establish connections with both the Computer #1 Port and the Computer
#2 Port when two computers are to be connected.
● When the monitor port is 13w3
The Computer #1 Port is also connected to the D-Sub 15 port with the use of the conversion
cable when the 13w3 port is used for connecting the computer’s monitor port to a work station.
·The projector’s computer #1 mini d-Sub 15 Port is connected to the computer’s monitor port
(13w3) with the 13w3 ↔D-Sub 15 cable (available on the open market).
·Set the switch to the analog setting (left-hand side) with the tip of a ballpoint pen or other
pointed object.
Computer #1 mini D-Sub15 Port
Computer Cable
(optional : ELPKC11)
Monitor port
(video port)
Monitor port Computer #1 mini D-Sub15 Port
13w3 Cable
(available on the open market)