86 - Replacing the Air Filter
■
■■
■Replacing the Air Filter
Replacement method
1Switch off the power supply, allow the projector to cool down, and then disconnect the
Power Cord. The amount of time required for the projector to cool down will depend
on the surrounding temperature.
2Remove the Air Filter.
Point
Ensure that the projector is stood on its end when replacing the Air Filter to prevent the dirt
and dust from penetrating inside.
3Set a new Air Filter in place.
Point
·Insert the clips before pressing on the catch to set the air filter in place.
·Dispose of used air filters in accordance with waste regulations in your community.