Projection - 43

2Select the Port to which the connection has been made when more than one item of

equipment has been connected.

Press the port button connected to the computer or video equipment to switch the input

source.

Point

·Even if there is a physical connection, the system will automatically switch to the state

used immediately before power-off if there is no input signal, or if the connected equip-

ment is not outputting a signal.

·The Computer #2/Component Video port sources that are switched with the [Computer]

and [Video] keys on the projector and the [Comp2/YCbCr] key on the remote control will

only display either the Computer2 (RGB) Computer2 (YCbCr) or the Computer2 (YCbCr)

depending on the Computer2 setting. (see page 69)

Connected
Port
Button to Select Display at the top
right-hand corner of
the screen
Main Unit Remote Control
Computer #1 Port [Computer]
(will change whenever
pressed)
[Comp1] Computer1
Computer2/
Component Video (RGB)
Computer2 (RGB)
Computer2/
Component Video (YCbCr)
[Video]
(will change whenever
pressed)
[Comp2/ YCbCr] Computer2 (YCbCr)
Computer2/
Component Video (YPbPr)
Computer2 (YPbPr)
Video P ort [Video]
(will change whenever
pressed)
Video
S-Video Port S-Video
Comp1
Esc
Menu
Comp1
P in P Preset
Video
Comp2/YCbCr
Help
- Volume +
Comp2/YCbCr
Video
Auto Resize
Video
Computer
A/V mute
Resize
Esc Help
Menu
Tracking Tracking
Sync
Sync
Shift
Keystone
Volume
Power
Computer
Video