Adjusting the Projection Position - 47
■
■■
■Adjusting the Projection Position
The projector can be adjusted into the following vertical projection positions.

Feet adjustments

Adjust the projection angle of the projector.
1Lift the Foot Adjust Lever with a finger and raise the front part of the projector.
The Front Foot will protrude.
2Remove your finger from the Foot Adjust Lever, and then let go of the projector.
3Rotate the lower part of the Front Foot to minutely adjust the height.
Point
·There are cases where the screen will be distorted into a trapezoid shape when foot
adjustments are performed. Adjust the trapezoid distortion with the keystone correction
function (see page 49)
·The Front Foot is restored by lifting the Foot Adjust Lever with a finger and lowering the
projector.
Foot Adjust Lever
Becomes lower
Becomes higher