Projection - 41
Projecting
This section provides explanations on starting and ending projection, and on the basic func-
tions for adjusting projected images.
■
■■

■Projection

Images can be projected after all connections have been completed.
Preparations
1Connect the projector to a computer and video equipment. (see page 26, 37)
2Remove the Lens Cover.
3Attach the supplied Power Cord to the projector.
Check to confirm the shape of the projector’s Power Inlet and Power Connector, align the
connector in the correct direction, and then insert it as far as it will go.
War ni ng
·Never look directly into the lens once the power supply has been switched on. Failure to
observe this may result in the powerful light damaging eyesight.
·Ensure that the Power Cord supplied is used. The use of cables other than the one supplied
may result in the outbreak of fire or electric shocks.
Caution
Do not perform any projection tasks with the Lens Cover attached. Failure to observe this may
result in the cover becoming malformed due to heat.
Power Inlet
Power Connector
Power Cord