P in P Function - 61

■
■■
■P in P Function
The video image (YCbCr or YPbPr) will be displayed as a sub-screen inside the computer
image or component video image.
1Press the [P in P] button.
Operation instructions will be displayed at the bottom left-hand side, and the sub-screen
will be situated at the top right-hand side of the main screen.
2Press the [Enter] button on the remote control to move the position of the sub-screen.
3Press the [E-Zoom] button to change the size of the sub-screen.
4Press the [2] button on the remote control unit to switch to sub-screen sound.
Press the [1] button on the remote control unit to return to the main-screen sound after the
sound has been switched.
5Press the [Enter] button to set the sub-screen display.
The operation guide in the bottom left-hand corner will be erased.
Point
·The sub-screen will be erased when the [PinP] button is pressed again.
·The computer image or video image (component signal only) will be displayed in the main
screen and the video image (Video, S-Video) will be displayed in the sub-screen, and the
video image on the sub-screen can be amended with the PinP settings. (see page 69)
·Switch the position, size, and sound of the sub-screen prior to fixing the sub-screen's dis-
play.
·The sub-screen can be switched between five different sizes.
·If the position of the sub-screen is changed, the next time PinP is used the sub-screen will
be displayed at the sub-screen position set previously.
·The sound cannot be switched between screens when the main screen images are
Computer2 or Component Video images, as the audio input port is shared for both the
main screen and the sub-screen (Video or S-Video).