When the Indicators provide No Help - 81

The image is cut up (Large)/SmallThe image color is bad
·The image is cut
up
·The image is small
●There is a possibility that the [Resize] setting has not been correctly
selected.
Press the [Resize] button.
see page56
●Has the [Position] been adjusted?
Adjust with [Menu] − [Image] − [Position].
see page67
●Is the selected resolution correct?
Align the computer with the signals supported by the projector. Refer
to the computer’s instruction manual for details on how to amend the
signals.
see page26
●Amend the resolution for note-type and liquid crystal type
computers.
Either amend the resolution so that the display fills the entire screen,
or set the image signals so that only external output is possible.
see page26
●Has the image brightness been correctly adjusted?
see page67
●Have the cables been connected correctly?
see page26, 37
●Has the contrast been correctly adjusted?
see page67
●Has the color setting been correctly adjusted?
see page70
●Have the color density and tint been correctly adjusted?
(The display on the computer monitor or the liquid crystal screen will
not always match up with the tint of the image, but this is not an
abnormality.)
see page67
●Is it time to replace the lamp?
If the Lamp Indicator is blinking, it means that the time to replace the
lamp is drawing near. When the time to replace the lamp draws near,
the image will appear dark and the tint will deteriorate. In this event,
replace the lamp with a new one.
see page87
●For component video signal input, are the settings under [Menu]
[Settings] [Computer2] correct for your system?
For component video signals, set to either [YCbCr] or [YPbPr]
depending on your input signal.
see page38, 39