If you plan to use the printer in Germany, observe the following:

To provide adequate short-circuit protection and over-current protection for this printer, the building installation must be protected by a 10 or 16 amp circuit breaker.

Note for German-speaking users:

Bei Anschluss des Druckers an die Stromversorgung muss sichergestellt werden, dass die Gebäudeinstallation mit einer 10 A- oder

16 A-Sicherung abgesichert ist.

Important Safety Instructions

Read all of these instructions before operating your printer.❏Follow all warnings and instructions marked on the printer.

❏Unplug the printer from the electrical outlet before cleaning. Use a clean, dry, lint-free cloth for cleaning and do not use liquid or aerosol cleaners.

❏Do not use the printer near water.❏Never spill liquid of any kind onto the printer.❏Do not place the printer on an unstable surface.

❏Slots and openings, located on the sides and bottom of the printer, are provided for ventilation. Keep these slots and openings clear to allow proper ventilation. Avoid placing the printer on a soft surface like a bed or a sofa, or in a small enclosed area, as this restricts proper ventilation.

❏Never push objects of any kind through the slots as they may touch high voltage points or short out parts that could result in fire or electric shock.

4Safety Instructions