4. Secure the interface card with the two retaining screws.
5.When you finish installing the option, plug in the power cable and reconnect the interface cables before turning the printer on.
To verify that the optional interface card is correctly installed, print a status sheet. See “Testing the Printer Connection” on page 16.
If the installed interface is not shown in the Hardware Configurations section of the status sheet, turn off the printer, unplug it, disconnect all interface cables, and review the steps above to make sure you installed the interface card correctly. If the installed interface still does not show up in the status sheet, contact your dealer or a qualified service representative for assistance.
34Installing the Options