Non-printed side of th e page is dirty
Toner may have spilled in the paper feed path. Remove the
Imaging Cartridge and then clean the paper path of the printer
using a soft, lint-free cloth.
cCaution:
Opening the printer exposes the fuser, which is marked by a
CAUTION Hot Surface Avoid Contact label. Be careful not to
touch the fuser.
Memory Problems Mem Overflow
This message indicates that you need to simplify the page you
are trying to print, change your memory allocation, or add
more memory to your pri nter.
Try simplifying your page by reducing the number or si ze of
fonts or the number or size of graphics, or both.
When using a PCMCIA card, ROM SIMM, or NLSP ROM, turn
off the printer, then remove the module.
Image Optimum
The printer cannot print at the requested quality level because of
insufficient memory, and the printer reduces the quality
automatically so that the printer can continue printing. Check to
see if the printout is acceptable. If not, add more memory (for a
permanent solution) or set Device Resolution to LOW (300 dpi)
and Page Protect to Auto temporarily in the printer driver.
LAlbatross Rev.c
A5 size Chapter 6
96/08/23 Pass 0, DR
6-14 Troubleshooting and Maintenance