2. To change the settings, press Menu, Item, or Value.
❑To select a new menu (menu category), press Menu.
❑To select an item (setting) in a menu, press Item.
❑To select a value (parameter) for an item, press Value.
❑To accept a new setting, press Enter.
❑Press ALT to select a menu, item, or parameter in reverse
order. See Appendix E for a map showing the order that
selecType menus are displayed in.
3. To exit SelecType mode, press On Line or SelecType.
SelecType menus
This section gives a brief description of the menus in SelecType
and lists the settings available on each menu. For more detailed
descriptions of the settings, see “Understanding SelecType
Settings” on page 5-8.
Test Menu
These settings select and perform the printer’s internal test
printing. You can obtain information on the printer’s current
settings, available fonts, and a brief summary of features. Also
see page 5-8.
Status Sheet, LJ4 Font Sample, ESCP2 Font Sample, FX Font
Sample, I239X Font Sample, PS Status Sheet*, PS Font
Sample*, PS Fact Sheet*, Ext Printer Info**
* available only when the EPSONScript Level 2 is installed
**available only when there is the data in installed optional ROM
LAlbatross Rev. c
A5 size Chapter 5
96/08/23 Pass 0, DR
5-4 SelecType