❏Be careful not to touch the fuser, which is m arked CAUTION
Hot Surface Avoid Cont a c t. If the printer has been i n use, the
fuser can be very hot.
❏Avoid touching the components insid e the printer unless
instructed to do so in this guide.
❏Never force the printer’s components into place. Al though the
printer is designed to be sturdy, rough handling can damage it.
❏Be sure not to scratch the surface of the drum. When you
remove the imaging cartridge from t he printer, always set the
unit on a clean, smooth surface. Also, avoi d touching the
drum, since oils from your skin can permanently damage its
surface and may affect print quality.
❏Do not turn the cartridge upside dow n or stand it on its sides.
CAUTION Hot Surface Avoid Contact
rg-3
R
Albatross Rev.c
Reference Guide
A5 size Introduction
’96/08/23 pass 0
Getting Started 13