Auto Continue
Permits the printer to automatically recover from a Print Overrun,
Mem Overflow, or Paper Set error. The pri nter con tinues pr inting
within a few seconds after one of these problems occurs.
When Auto Continue is off, you must press the button on the
control panel to resume printing. In mos t cases, leave Auto
Continue off so you can tell when an error occurs and make
the necessary corrections. You might want to set Auto
Continue on when printing long jobs or when you are away
from the printer for long periods.
Toner Save Mode
Turns the Toner Save mode on. When turned on, the printer
saves toner by substituting a gray shade for the black inside of
characters. The characters are outlined in full black on the right
and lower edges.
Image Optimum
Reduces the amount of graphics data when the data reaches the
memory limit, allowing complex documents to be printed.
When this mode is on, graphics quality is reduced. The options
are Off, On, and Auto. On and Auto are the same.
Paper Type
Allows you to use various types of paper. Thin W is usef ul for
the regular size plain paper under 75g/m2. Thick N is useful for
irregular size plain paper and envelopes that are less than
257mm wide. Trnsprnc is useful for transparencies. Paper Type
usually works best if set to N ormal.
Next
Turn to the next page.
Prev
Turn to the previ ous page.
R
Albatross Rev.c
A5 size Chapter 4
’96/08/23 DR, pass 0
Remote Control Panel Utility 4- 13