BATTERIES AND MEMORY CARD INSTALLATION
ACCESSING THE BATTERIES AND MEMORY CARD
ALERT
Be sure the camera is turned OFF before opening and closing the battery / memory card cover.
Opening the cover
Slide the Battery/Memory Card Cover in the direction of the arrow while pressing down on it.
Closing the cover
Slide the Battery/Memory Card Cover in the direction of the arrow until it clicks into place.
HOW TO INSERT AND REMOVE THE MEMORY CARD
The memory card is installed in the camera at the factory. Check that it is properly set.
MEMORY CARD INSERTION
Checking that the card is facing the right direction, slide it in until it clicks.
REMOVING THE MEMORY CARD
Release the card by pushing once and then pull it out with your fingers. (Push once to set it, push again to release it.)
c CAUTION
The memory card is a precision electronic component. Comply with the instructions below to avoid damage.
❏Don't touch the terminals with your fingers or metal. Resulting static electricity could cause damage. Discharge body static electricity by touching something metal before you handle the card.
❏Don't bend, drop or otherwise shock the memory card.
❏Keep the memory card away from water, excessive heat or direct sunlight.
❏Don’t break down or take apart the memory card.
Note:
You may also use a MultiMedia Card
You may use an SD memory card or a MultiMedia Card. (See pages 19, 53.)
Note:
The memory card must be removed when:
❏you would like to copy images saved on the memory card to a computer.
❏the printer has a memory card slot that you may use directly.
BATTERY SETUP
Be sure the battery poles + - are aligned properly.
SETTING THE BATTERIES
Insert the batteries according to the pole indications on the cover.
Note:
To find out what batteries may be used. See page 53.
c CAUTION
If you insert the batteries incorrectly you may cause leaking, overheating or injury to yourself. You may also damage the camera.
English
CAMERA SETUP | 11 |