DIRECT PRINTING MESSAGES

MESSAGE

PROBLEM & SOLUTION

 

 

 

Battery power is

Problem:

Little battery power remaining.

low. Connect AC

Solution:

The camera won't continue to direct print when

adapter.

 

the power is low. Connect to AC power.

 

 

 

 

 

Make sure that the

Problem:

The DP cable is disconnected; the printer

printer is on and

 

selected doesn't support the direct printing; is

connected.

 

connected to another device (other than a

 

 

computer), the printer power is turned off.

 

Solution:

Reconnect the camera correctly to the printer

 

 

and turn the printer power on. (See page 39.)

 

 

 

Black ink out.

Problem:

The printer is out of black ink.

Replace the black

Solution:

Replace the black cartridge following the

ink cartridge.

 

printer instruction booklet.

 

 

 

 

 

Color ink out.

Problem:

The printer is out of colored ink.

Replace the color

Solution:

Replace the colored cartridge(s) following the

ink cartridge.

 

printer instruction booklet.

 

 

 

 

 

Check the ink

Problem:

An ink cartridge is missing or not set properly in

cartridges.

 

the printer.

 

Solution:

Set or reset ink cartridge(s) following the printer

 

 

instruction booklet.

 

 

 

Paper out. Load

Problem:

The paper isn't set properly in the printer.

paper.

Solution:

Set or reset the paper following the printer

 

 

 

instruction booklet.

 

 

 

Paper jam.

Problem:

A sheet of paper has jammed during printing.

 

Solution:

Clear the jam following the printer instruction

 

 

booklet.

 

 

 

This image cannot

Problem:

You have selected an image that can't be

be printed.

 

printed.

 

Solution:

Select another image.

 

 

 

MESSAGE

PROBLEM & SOLUTION

 

 

 

Printer error.

Problem:

There may be a problem with the printer.

 

Solution:

Turn the printer off for a few seconds then turn

 

 

the power back on. If the error message still

 

 

appears, turn the power off and check to see if

 

 

there is anything (packing materials, paper)

 

 

stuck inside the printer. Then turn the power

 

 

back on.

 

 

 

There is no

Problem:

The printer has frozen and won't communicate

response from the

 

with the camera.

printer.

Solution:

Check the camera to printer connection.

 

 

 

Check that the printer power is turned on. See

 

 

the printer instruction booklet for further details.

 

 

 

Could not print. Try

Problem:

If the printer is in the middle of printing

printing again?

 

something, it may not be able to accept the

 

 

next request.

 

Solution:

Restart the printer or wait until the current print

 

 

run is finished and then try again.

 

 

 

Could not print.

Problem:

The printer has rejected the print request.

 

Solution:

If neither of the above works, see the printer

 

 

instruction booklet for further remedies.Restart

 

 

the printer or resend the request from the

 

 

camera. If none of these remedies work,

 

 

contact your nearest Epson Customer Support.

 

 

 

A communication

Problem:

Either the cable has been disconnected or the

error has occurred.

 

power has been turned off.

 

Solution:

Recheck that the cable is connected, turn the

 

 

power back on and try again.

 

 

 

xx images could

Problem:

If some of the images were taken with another

not be printed.

 

camera or have been changed by software,

 

 

only the images taken with this camera will be

 

 

printed.

 

Solution:

Use the actual camera or computer that was

 

 

used to create the images in order to print

 

 

them.

 

 

 

58TROUBLESHOOTING