PRINTING THE IMAGE SEEN ON THE LCD MONITOR

Only the images visible on the LCD monitor will be printed.

Turn the DIAL SWITCH to PLAYBACK MODE and then turn the POWER ON.

1.Pressing the PRINT button changes the display to DIRECT PRINTING mode and highlights "Displayed image.".

2.Press the PRINT button again to confirm selection. Use the ud buttons to select the number of prints.

To change the print setting, press the FLASH button or the MENU button. (See pages 40, 42-45.)

Press the MACRO button to return to step 1.

3.Press the PRINT button to begin printing. Press the MACRO button to cancel printing.

PRINTING SELECTED IMAGES

How to select and print an image.

Turn the DIAL SWITCH to PLAYBACK MODE and then turn the POWER ON.

1.Press the PRINT button to change the display to DIRECT PRINTING mode.

Press the MACRO button to return to PLAYBACK mode.

2.Using the ud buttons select "Select Images.", then press thePRINT button.

3.Use the l r buttons to choose the images, then use the ud buttons to enter the number of copies desired.

Press the MACRO button to return to step 2.

Press the FLASH button to change the Select Frame. (See pages 40, 42-45.)

To display only a single image, press the T ZOOM button.

4.Press thePRINT button to display the "select images" screen. Press it again to start printing.

To change the print setting, press the FLASH button or the MENU button. (See pages 40, 42-45.)

Press the MACRO button to cancel printing while "printing..." is being displayed.

ALERT

If any DPOF files (See page 46.) exist, a message will appear asking whether you would like the settings to be used. If you choose not to use the settings, all images will be set at "0".

PICK IMAGES

Select/cancel the selection of all the image data to print.

3.Press the MENU button or theFLASH button to change the display to Print Settings.

Use the l r buttons to choose the Pick Images. Press the MACRO button to return to step 2.

4.Using the ud buttons, select "Set all image to one.", "Cancel all images." or "Designate printing extent.".

Press theFLASH button to select images. Press theMACRO button to return to step 2.

Set all image to one.

Adjust the setting to print all the printable picture images recorded in memory.

Cancel all images.

Set the number of printable images to 0.

Designate printing extent.

Select the first picture image to print with ud l r buttons and press the FLASH button.

Select the last picture image to print with the next ud l r buttons and press the FLASH button.

Note:

After "Pick Images", you can select each picture image and set the number to print for each of them.

40DIRECT PRINTING