8)Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9)Protect the power cord from being walked on or pinched particularly at plugs, convenience recectables, and the point where they exit from the apparatus.

10)Only use attachments/accessories specified by the manufacturer.

11)Unplug this apparatus during lightning storms or when unused for long periods of time.

12)Refer all servicing to qualified service personal. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

wWARNING

To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.

Only use this adapter in the manner described in your product's documentation. Check the product's documentation to make sure that this is the correct adapter for your product.

Read all relevant safety and operating instructions before using these products, as misuse could result in personal injury from fire, explosion, leakage, overheating, or electric shock.

These safety and operating instructions should be kept for future reference.

Note:

AC Adapter model A211H conforms to CE marking requirements in accordance with EC Directives 73/23/EEC and 89/336/EEC.

Beware of electrical shock hazards.

Do not use this product near water or handle it with wet hands.

Keep away from heat sources. Do not use the charger outside the temperature range of 5°C to 35°C (41°F to 95°F).

Do not insert objects into any openings as they may touch dangerous voltage points or short out parts.

Never disassemble or modify this product.

Use only indoors, in a dry location.

Do not expose to water or excess humidity.

Use the type of power source indicated on the label, and always supply power directly from a standard domestic electrical outlet.

Do not place multiple loads on the electrical outlet.

Be sure your AC power cord meets the relevant local safety standards.

Never insert or disconnect the power plug with wet hands.

Power-supply cords should be protected from abrasion, cuts, crimping and kinking. Be sure to place your cords to avoid any damage. Do not place objects on top of the power cord or allow the power cord to be stepped on or run over. You should take special care to try to keep the power cord straight at the ends and the points where it enters and leaves the transformer.

Do not allow the AC power cord to become damaged or frayed.

Unplug your equipment from the wall outlet and refer servicing to qualified personnel under the following conditions:

If the power cord or plug is damaged; if liquid has entered your equipment; if your equipment has been exposed to rain or water; if your equipment has been dropped or damaged; if your equipment is operating abnormally or exhibits a distinct change in performance. Adjust only those controls described in your product documentation.

Never attempt to repair this product yourself. Improper repair work can be dangerous.

Unplug this product from the wall outlet before cleaning.

Clean only with a clean, soft dry cloth.

Do not use liquid or aerosol cleaners.

Keep out of reach of children.

For US and Canadian users:

Use the included power cord or a 6 to 10 foot UL-approved type SPT-2 or heavier type, 2 x 18 AWG cord with a 125 V 10 A plug and 125V 7A connector.

If you plan to use the AC Adapter in Germany, observe the following: To provide adequate short-circuit protection and over-current protection for these products, the building installation must be protected by a 16 Amp circuit breaker.

c CAUTION:

This product is designed for use with EPSON products ONLY. Do not attempt to use it with other electronic devices.

English

7