REGISTER / DELETE SOUND DATA
You can take the same procedure to change both shutter sound and
Turn the DIAL SWITCH to SET UP MODE and then turn the POWER ON.
The SETUP menu will appear on the LCD monitor.
1. | Use the ud buttons and select a Shutter Sound, Focus Lock Sound or |
| Self Timer Sound. |
2. | Use the l r buttons and select the item to change. |
| You can select the item in the order as beep sound ➝ sound1 ➝ sound2. |
| You can register sound1 and sound2. |
3. | Press the FLASH button. |
| The sound data registered in the camera body is displayed. |
DELETE SOUND DATA
If (in step 6 above) there was not enough memory space for new sounds, delete the old sounds as follows;
5.Use the ud buttons and select the sound data to delete. You can play the sound by pressing the 
REVIEW button.
6.Press the 
MACRO button.
A delete confirmation request appears.
7.Press the 
FLASH button. The sound data is deleted.
AUTO POWER SAVE
When the camera is turned on but inactive for a period of time, the camera automatically shuts down to save battery power.
4. Use the r button and display the sound data in the memory card. |
The next steps are all continued from step 5.
Note:
If the sound data had the same name as one in the camera body, a message on overwriting confirmation will be displayed. Press the 
FLASH button to confirm the new sound with replacing the old sound of the same number.
REGISTER SOUND DATA
5. | Use the ud buttons and select the sound data to register. |
| You can play the sound by pressing the REVIEW button. |
6. | Press the FLASH button. |
1.When there is no activity for over 3 minutes, the camera will enter sleep mode.
While in Sleep mode, the green light will blink. The LCD monitor will turn off and the CPU will also be in sleep mode.
Note:
To cancel Sleep mode, press the SHUTTER button, or any other button on the back of the camera. You can also simply turn the DIAL SWITCH.
Indicator light (green)
LCD monitor
A copy confirmation request message will appear. |
If the camera is low on memory space, the new sound cannot be copied. |
Delete the old sound first, then copy the new one. |
7. Press the MACRO button. |
The new sound is copied to the camera. To cancel this operation, press |
the FLASH button. |
2.When the camera is left in Sleep mode for over 10 minutes, it will shut down automatically.
The lens will retract and the lens cover will close.