Removing a Memory Card
Note:
Your camera won’t store photos and some of its buttons won’t operate without a memory card correctly installed.
1Make sure the camera is turned
off, then slide the battery cover until it pops up.
2 Push in the memory card to release it. The card pops out.
3Pull out the memory card, then
press down on the battery cover and slide it back into place.
Installing the Battery
1Turn the camera on its left side.
2 Slide the battery cover until it pops up as shown:
3Insert the battery into the
compartment, positioning it as shown with the arrow facing down. Press it down until it clicks into place.
12