Use of the flash is not recommended with continuous shooting, so make sure you have adequate lighting.

1Turn the Mode dial to continuous shooting.

2If you want to adjust the resolution or other settings, press the MENU button. See page 22 for a list of available settings or see the Reference Guide.

3Make sure you are at least 20 inches (50 cm) away from your subject.

Note:

To turn on digital zoom, see the Reference Guide.

◗To zoom in on your subject, press the T (telephoto) button. To zoom in more, release the button and press it again.

◗To zoom out, press the W (wide-angle) button. To zoom out more, release the button and press it again.

4Center your subject in the middle of the square focus frame on the LCD screen.

5Press and hold the shutter button halfway. The focus frame turns green and the focus is set.

6Press the shutter button all the way down. While you hold the shutter button down, photos are taken continuously. Release it to stop shooting.

24